• Increases resale value
• Will not crack, rot, or split
• No drilling or bolting
• Custom fit to any bed with no loss of storage space
• Permanent seal against rust and corrosion
• Withstands temperature extremes
• Limited lifetime warranty
• Sound deadener
|
• Requires no maintenance
• No need to remove, clean or reinstall
• Flexible and repairable in case of an accident
• Covers up nicks and scratches
• Non-skid texture
• Temperature insulator
• Resistant to most chemicals
|
Below are 3 areas that our higher pressure, hot spray liners out performs other brand liners:
| Test: |
LineX Brand Liners |
Rhino Linings Hardline |
Qwik Liner |
Line-A-Bed's Liners |
| Tensile Strength |
2,066 PSI |
2,200 PSI |
2,200 PSI |
3800 PSI |
| Elongation |
93% |
80% |
160% |
200% |
| Hardness |
50 Shore D |
55 Shore D |
53 Shore B (not even D) |
55 Shore D |
|
|
|
| Technical data of our high pressure, hot spray:
TECHNICAL DATA (Based on compressed film)
Mix Ratio, by volume.....................................................................1A:B
Pot Life..................................................................................3-5 seconds
Tack Fress Time............................................................10-30 seconds
Recoat Time..........................................................................0-12 hours
Viscosity at 150-160 degrees F (65.5-71 degrees C), Brookfield:
Side A.....................................................................................120+ 20 cps
Side B......................................................................................190+20 cps
Density (Side A & B Combines)...........................................91bs./gal
Flash Point......................................................................>200degrees F
Hardness, ASTM D-2240..............................................55+5 Shore D
Tensile, ASTM 412-C.....................................................3800+300 psi
Elongation, ASTM 412-C.....................................................200+20%
Tear ASTM 624-C................................................................400+40 pli
Service Temperature...................-40 degrees F to 250 degrees F |
|
|
|
Our new high pressure, hot spray is offered in several colors to pick from. Please feel free to drop by the showroom and see samples. Of course, we spray truck beds mostly, but we can also spray many other items. Click here for pictures of a couple other items we've sprayed.
|
Rhino Linings® Hardline® is a registered trademark of Rhino Linings®, USA
Line-X® is a registered trademark and is headquartered in Santa Ana, CA.
|
